Re: ip address on pix fw interface

[Duncan <drsharp () pacbell net>]

Luciano Z wrote:

> Hi!
>
> I´m trying to remove the ip address of a pix NIC but
> it´s not working. How can I reset the configured
> address? Something like "no ip address <ip>" on a
> cisco router.
>
> Att,
>
> Luciano

Luciano;

pixgw(config)#  ip address outside 0.0.0.0
Warning : IP and subnetmask may be an invalid pair

pixgw(config)# sho int e0
interface ethernet0 "outside" is up, line protocol is up
  Hardware is i82559 ethernet, address is 000b.5f57.4430
  IP address 0.0.0.0, subnet mask 0.0.0.0
  MTU 1500 bytes, BW 10000 Kbit half duplex
        51233 packets input, 39944577 bytes, 0 no buffer
        Received 256 broadcasts, 0 runts, 0 giants
        1 input errors, 1 CRC, 0 frame, 0 overrun, 1 ignored, 0 abort
        36294 packets output, 6433677 bytes, 0 underruns
        0 output errors, 4 collisions, 0 interface resets
        0 babbles, 0 late collisions, 117 deferred
        0 lost carrier, 0 no carrier
        input queue (curr/max blocks): hardware (128/128) software (0/16)
        output queue (curr/max blocks): hardware (0/11) software (0/1)

Yours,
Duncan

_______________________________________________
firewall-wizards mailing list
firewall-wizards () honor icsalabs com
http://honor.icsalabs.com/mailman/listinfo/firewall-wizards